1987 924S w/ MAF???
#1
Instructor
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I picked up a 87 924S that was set up for track days and/or autocross. I am slowly sorting out the car in my little bits of free time and there is a MAF kit on it.
Does anybody know anything much on the kit? I am going to megasquirt the car and I am just looking for some info on it so I can get rid of it.
It is a 75mm meter and the phone number on it is not in service anymore.
https://picasaweb.google.com/1177286...eat=directlink
Thanks all,
Pete
Does anybody know anything much on the kit? I am going to megasquirt the car and I am just looking for some info on it so I can get rid of it.
It is a 75mm meter and the phone number on it is not in service anymore.
https://picasaweb.google.com/1177286...eat=directlink
Thanks all,
Pete
#3
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
If your maf'd why would you megasquirt it? the Motronic is pretty decent and you can tune it with some freely available tools (or convert to a known maf kit)
Check out Roguetuning.
Check out Roguetuning.
#4
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
248 area code? Of course it's not in service......the entire area went bankrupt. Didn't you hear about it on the news? haha
On topic - the only MAF I know (from years ago) would be Huntley. Now Rogue tuning has one as well for the N/A cars.
On topic - the only MAF I know (from years ago) would be Huntley. Now Rogue tuning has one as well for the N/A cars.
#5
Hates Family Guy
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Googling the number comes up with this.
All long dead and gone - looks like a lot of Mustang guys used their stuff.
Professional Flow Technologies
21890 Meyers
Oak Park, MI 48237
Website: www.pro-flow.com
Phone: 248-399-9223
Fax: 248-399-4054
All long dead and gone - looks like a lot of Mustang guys used their stuff.
Professional Flow Technologies
21890 Meyers
Oak Park, MI 48237
Website: www.pro-flow.com
Phone: 248-399-9223
Fax: 248-399-4054
#7
Instructor
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
BTW the car has questionable wiring and I want to switch to a new harness. I am familiar with Megasquirts and have tuned them before so that is why I am switching.
I am doing a 36-1 crank trigger w/ hall effect sensor, LS2 coils and all gm sensors.
Pete
I am doing a 36-1 crank trigger w/ hall effect sensor, LS2 coils and all gm sensors.
Pete