Notices
924/931/944/951/968 Forum Porsche 924, 924S, 931, 944, 944S, 944S2, 951, and 968 discussion, how-to guides, and technical help. (1976-1995)
Sponsored by:
Sponsored by:

Vroom vroom race car

Thread Tools
 
Search this Thread
 
Old 06-12-2013 | 08:30 PM
  #1  
Steinkrunk's Avatar
Steinkrunk
Thread Starter
Intermediate
 
Joined: Jun 2013
Posts: 31
Likes: 0
Default Vroom vroom race car



Just put on the exhaust I got with the car which consisted of a tubular header, cat delete and straight pipe. My eardrums are still ringing lol time to find a single chamber muffler to quiet her down alittle lol
Old 06-12-2013 | 08:37 PM
  #2  
951Saga's Avatar
951Saga
Burning Brakes
 
Joined: Jul 2007
Posts: 912
Likes: 2
From: Hilliard, OH
Default

That is one pissed off 944!
Old 06-12-2013 | 09:10 PM
  #3  
Paulyy's Avatar
Paulyy
Professional Hoon
Rennlist Member
 
Joined: Jan 2010
Posts: 7,090
Likes: 4
From: Melbourne, Australia
Default

You need a huge cam to top of the noise
Old 06-12-2013 | 09:49 PM
  #4  
Steinkrunk's Avatar
Steinkrunk
Thread Starter
Intermediate
 
Joined: Jun 2013
Posts: 31
Likes: 0
Default

I agree with paulyy, need some bite to match the bark. If it sounds like a race car it better go like a race car lol. So I'm picking up a 2' resonator to replace the cat delete pipe and if its still too loud ill throw on a spintech muffler then I should be happy.
Old 06-12-2013 | 10:07 PM
  #5  
Paulyy's Avatar
Paulyy
Professional Hoon
Rennlist Member
 
Joined: Jan 2010
Posts: 7,090
Likes: 4
From: Melbourne, Australia
Default

I have 2x 3" blow through Stainless Steel mufflers on mine. one is around 12" long and the other is 18" long
Just idle..

Old 06-13-2013 | 12:13 AM
  #6  
CyCloNe!'s Avatar
CyCloNe!
Rennlist Member
 
Joined: Dec 2009
Posts: 4,124
Likes: 124
From: Chesapeake, VA 23322
Default

I think your exhaust swallowed a p'd off cat
Old 06-13-2013 | 03:06 AM
  #7  
Fara's Avatar
Fara
Rennlist Member
 
Joined: Nov 2011
Posts: 721
Likes: 2
From: Sydney, Australia
Default

I'd just like to post saying THANK YOU for using the correct jackstand points on your car.

Also, I'm looking forward to running the same thing occasionally when I get my MSDS headers and 2.5" pipe. I'm also getting a pre-muffler and Borla XR-1 for streeting it though :P
Old 06-13-2013 | 05:30 AM
  #8  
Butters944's Avatar
Butters944
Today I got
My Custom Title
Rennlist Member
 
Joined: May 2011
Posts: 4,857
Likes: 0
From: Las Cruces NM (NMSU) / Fountain Hills AZ (home)
Default

Paulyy what kind of cam is in there? Sounds sick!
Old 06-13-2013 | 07:06 AM
  #9  
Paulyy's Avatar
Paulyy
Professional Hoon
Rennlist Member
 
Joined: Jan 2010
Posts: 7,090
Likes: 4
From: Melbourne, Australia
Default

Butters, It's a custom CEP/JME cam as in nothing off the shelf.



To get an idea how loud that straight pipe is (F**kn loud!)
Old 06-16-2013 | 08:13 PM
  #10  
Steinkrunk's Avatar
Steinkrunk
Thread Starter
Intermediate
 
Joined: Jun 2013
Posts: 31
Likes: 0
Default



Threw a 28" resonator in place of the test pipe. It took a lot of the "bark" out of the exhaust. Now instead of being insanely loud at any throttle position it's pretty loud above 3k rpms.

I like the raw sound it has now, just loud enough for me to terrorize the neighborhood but not loud enough to make me need hearing aids by 30.
Old 06-16-2013 | 08:46 PM
  #11  
Paulyy's Avatar
Paulyy
Professional Hoon
Rennlist Member
 
Joined: Jan 2010
Posts: 7,090
Likes: 4
From: Melbourne, Australia
Default

That is still bloody loud! It suppose to be a track car right?
Old 06-16-2013 | 09:07 PM
  #12  
thirdgenbird's Avatar
thirdgenbird
Drifting
 
Joined: May 2008
Posts: 2,368
Likes: 2
Default

Very loud...
Old 06-16-2013 | 09:12 PM
  #13  
Calmchaos's Avatar
Calmchaos
Rennlist Member
 
Joined: Feb 2006
Posts: 2,038
Likes: 3
From: Burlington. NJ
Default

Originally Posted by Fara
I'd just like to post saying THANK YOU for using the correct jackstand points on your car.

Also, I'm looking forward to running the same thing occasionally when I get my MSDS headers and 2.5" pipe. I'm also getting a pre-muffler and Borla XR-1 for streeting it though :P
Which points are those? It looks like they're all right in the center. Is that how you're supposed to hold it up?
I want to learn!!
Old 06-16-2013 | 10:07 PM
  #14  
Steinkrunk's Avatar
Steinkrunk
Thread Starter
Intermediate
 
Joined: Jun 2013
Posts: 31
Likes: 0
Default

If you look at my first vid the red jack stands are at the correct points. The orange ones are "back up" jack stands in case someone walks into the garage and kicks one or my dog raps his leash around one. They are in front of the rear wheels, next to the pinch weld and rocker panel.

Paulyy, yea that's what I'm building this up as. Just a weekend racer I can have fun out on the track with maybe twice a year. Then the rest of the summer drive around my town and terrorize old people
Old 06-17-2013 | 11:54 PM
  #15  
goatfarmerdave's Avatar
goatfarmerdave
Pro
 
Joined: Dec 2010
Posts: 549
Likes: 1
From: Just north of Toronto
Default

There is a kid in my neighbourhood that ran around last summer with the noisiest sounding exhaust around.He actually got made a fun of a lot by everyone because it was the loud obnoxious car that went nowhere fast.They all were giving me grief because he was giving the brand a bad name.They would say "oh you have one of those crap cars" now he's not around this summer,I'm back to getting all kinds of nice compliments again about my 944.....just sayin'


Quick Reply: Vroom vroom race car



All times are GMT -3. The time now is 09:16 PM.