adrial

My mech referred me to Dent wizard....who basically referred me to dealers... $99/panel if largest dent is quarter sized. The local Porsche dealer wanted $150/panel.

Thanks to parking at work, I have 2 dings on the hood, 3 or 4 on the passanger side door, 1 on the rear passanger side 1/4 panel, 1 on the nose panel and 1 on the front driver side 1/4 panel.
I'm gonna start parking somewhere else...this is ridiculus...There's no way for me to park better in that lot..I'm always centered/close to a wall or curb and as far away from other cars as possible.

That's $600 in paintless dent removal I'd be looking at!! A little pricey eh?

Does anybody know of a cheaper place for paintless dent removal in the Metro NYC area?

Antonio

The Metro PCA chapter just had some kind of event with an outfit in Long Island that included discounted dent removal (Tech session @ Detailing Dynamics w/ dent removal John Mingst JMINGST@AOL.COM). Maybe you can talk them into extending you a discount. By the way, why are you removing the ATE chips?

adrial

Thanks!
Someone emailed me about Matt Zakarian doing dent removal in Port washington...he said that a tech session was done there last saturday? Are you guys talking about the same thing?

Phone # at the place he was talking about is: 516 944 4024.

I have to update my profile..I was doing to remove them when I discovered that the jet installed was giving me 18psi in 3rd and 20psi+ in 4th...but I decided to just remove the jet and leave the chips...allowing me to run 15psi on the street and 13psi on the track(DE really).

The jet that the PO's mech installed was too small...a #145 vs. what was suppose to be a #190.

So I was just pissed about the abuse my car took @ 20psi+ and just wanted to pull out all the mods and have a creampuff..but I deicded against that to a point...my only mods will be 15psi boost n thats it.

thanks,
Adrial