Replacing control arm bushes
#1
Pro
Thread Starter
Replacing control arm bushes
I'm just about to replace control arm bushes - just the front ones for now, where the control arm joins the cross-member.
I have new bushes from Powerflex, but they don't seem to fit, and I'm wondering whether I also need to remove the metal sleeve that's still in the control arm. Looks like some cutting and banging would be needed to get it out, and I'm also wondering if the harder metal is supposed to protect the softer control arm allow in some way.
Has anyone done this?
(Attached pic shows the control arm with the old bushes removed, metal sleeve in situ.)
I have new bushes from Powerflex, but they don't seem to fit, and I'm wondering whether I also need to remove the metal sleeve that's still in the control arm. Looks like some cutting and banging would be needed to get it out, and I'm also wondering if the harder metal is supposed to protect the softer control arm allow in some way.
Has anyone done this?
(Attached pic shows the control arm with the old bushes removed, metal sleeve in situ.)
Last edited by zogster; 05-16-2015 at 03:33 PM.
#3
Rennlist Member
Just did a quick search and this is the thread from when I installed my bushings back in the day.
https://rennlist.com/forums/924-931-...ol+arm+bushing
Good luck, and have fun!
https://rennlist.com/forums/924-931-...ol+arm+bushing
Good luck, and have fun!