Rebuilding the center console
#1
Rebuilding the center console
Ok so this will be boring stuff for most of you but I know alot of folks like to see pics so snapped a few during this process for kicks.
Started out with two consoles, each one with issues.
Took both completely apart. Here is a piece of PO thinking....
oh my hing broke on my console, no problem a few brass hinges will fix her right up!
Even I would not go this low.
Started out with two consoles, each one with issues.
Took both completely apart. Here is a piece of PO thinking....
oh my hing broke on my console, no problem a few brass hinges will fix her right up!
Even I would not go this low.
#4
So when all finished I have a nice black console with a little red accent.
And a pile of left over parts.
michael
And a pile of left over parts.
michael
Last edited by F40LM; 03-09-2011 at 09:54 PM. Reason: removed double pic post
Trending Topics
#9
#11
#12
So far I have been happy with the fabric and vinyl paint. Just make sure you do proper prep, take your time, and do multiple lite coats. It even matches the stock black vinyl (at least in my '86) very close in my opinion.
#15
I had mine recovered by a good friend of mine that does custom upholstery work. He did my dash with red stitching around the gauges and red stitching around the console. The seas are also being redone with a modern look, the door cards in a custom look, as well as the steering wheel and e-brake cover. He's a member on here, Bugshop, although I dont think he posts. He does damn fine work.... i'll post up some pics when it's all completed