DME Temperature Sensor Wiring
11-15-2010, 11:55 AM
#1
Addict
Rennlist Member
Rennlist Member
Thread Starter
Join Date: May 2001
Location: Charlotte, USA
Posts: 520
Likes: 0
Received 0 Likes
on
0 Posts
DME Temperature Sensor Wiring
On my '83 944 I noticed that the wiring harness to the DME temperature sensor had been spliced and taped up. When I removed the tape I found that someone had soldered a resistor in line and the connector looks like it was originally for something else (has extra wire). Car runs okay but it idles a little rough.
Anybody know why this was done? Should I replace the sensor and remove the resistor? Also, does anyone have an old harness I could get the correct connector and about 4 " of the wiring, please let me know.
Anybody know why this was done? Should I replace the sensor and remove the resistor? Also, does anyone have an old harness I could get the correct connector and about 4 " of the wiring, please let me know.
Last edited by LAURIER; 10-03-2013 at 10:34 AM.
