WTT power rack for manual rack
#16
Rennlist Member
My '84 SP2 race car has a converted rack, but done by a previous owner. Basically appears to have blocked off some of the pipe inlets/exits. Some piping still attached, but doesn't do anything. I do not know if any internal mods exist. It does seem to be heavier than an OEM manual rack when not moving, but at speed (5 MPH and above) it works just fine.
However, I did discover that the knuckle connection to the steering shaft is different between the manual and power racks. So make sure you grab those parts as well if you do get a manual rack.
However, I did discover that the knuckle connection to the steering shaft is different between the manual and power racks. So make sure you grab those parts as well if you do get a manual rack.