How to replace factory-style hose clamps?
03-02-2002, 07:27 PM
#1
Racer
Thread Starter
Join Date: Nov 2001
Location: Princeton, NJ
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
How to replace factory-style hose clamps?
I'm in the process of replacing the majority of the vacuum hoses in my fuel injection system on an '86 951. I noticed that there is a combination of regular hose clamps and factory-style clamps.
The regular hose clamps can be loosened with a screwdriver. The other clamps, however, must be cut to be removed. I plan to order replacement parts, but what tool will I need to properly reinstall?
Recall these are about 1/4" wide metal bands in various diameters. Do I really need a Porsche-specific tool, or will a generic "crimper" do the job? What should I look for in the tool dept?
Thanks for your help...
The regular hose clamps can be loosened with a screwdriver. The other clamps, however, must be cut to be removed. I plan to order replacement parts, but what tool will I need to properly reinstall?
Recall these are about 1/4" wide metal bands in various diameters. Do I really need a Porsche-specific tool, or will a generic "crimper" do the job? What should I look for in the tool dept?
Thanks for your help...
03-02-2002, 11:44 PM
#2
Racer
Join Date: Dec 2001
Location: Trondheim, Norway
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
Use regular clamps when reinstalling. This is not a "Porsche" speciality. All cars use these non reusable hose clamps. Guess they are easier to install.
Eirik Kvello-Aune
<a href="http://www.diateam.no/porsche" target="_blank">www.diateam.no/porsche</a>
Eirik Kvello-Aune
<a href="http://www.diateam.no/porsche" target="_blank">www.diateam.no/porsche</a>
