mj951

Should new rollers spin freely or feel quit tight. I picked up a belt and roller kit along with a reman water pump and have a question regarding the bearings on these components. Should the water pump and rollers all spin pretty freely on there bearings? The parts I just received seem a little snug? The water pump pully is tighter than i would have expected and the rollers on the car have more free spin than the new ones going on. Not sure what's normal as this is my first pump/belt/roller job. Thanks.

Darwantae951

Snug is good. When they spin freely, they are getting close to the point of replacement. The water pump should not have any free spin.

mj951

Great, thanks.