The Epic '84 944 Part Out - New Deals!!
10-20-2009, 04:47 PM
#61
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Join Date: Aug 2003
Location: Lake Grove, Long Island, NY
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
From your '84, I need the harness the supports the switches in the steering column, headlight switch and such. On my '83, this is all wrapped in a tan cloth tape. I know it's tough to get out, but if you can cut the bundle as close to the fuse block as possible.
I had a short in mine, where the steering column mounting plate cut into the harness and shorted/melted those circuits.
I had a short in mine, where the steering column mounting plate cut into the harness and shorted/melted those circuits.
10-21-2009, 10:08 AM
#62
Advanced
Thread Starter
Join Date: Aug 2006
Location: Land O Lakes, Fl
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
From your '84, I need the harness the supports the switches in the steering column, headlight switch and such. On my '83, this is all wrapped in a tan cloth tape. I know it's tough to get out, but if you can cut the bundle as close to the fuse block as possible.
I had a short in mine, where the steering column mounting plate cut into the harness and shorted/melted those circuits.
I had a short in mine, where the steering column mounting plate cut into the harness and shorted/melted those circuits.
10-22-2009, 02:14 AM
#63
RL Community Team
Rennlist Member
Rennlist Member
Do you still have the heater control valve? I just need the clip that hold the cable to the valve. I know it's a small stupid part but I lost mine and the constant heat is driving me nuts.
10-22-2009, 12:24 PM
#64
Advanced
Thread Starter
Join Date: Aug 2006
Location: Land O Lakes, Fl
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
11-06-2009, 10:20 AM
#72
Advanced
Thread Starter
Join Date: Aug 2006
Location: Land O Lakes, Fl
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
