Thread pitch/connector style for 944S FPR
08-13-2009, 06:40 PM
#1
Burning Brakes
Thread Starter
Thread pitch/connector style for 944S FPR
All,
My car is a 944S chassis that I'm installing an NA motor in. The stock fuel lines coming out from the fender have female threaded ends which connect to the stock male threaded 944S FPR on the fuel rail.
As the "S" fuel pressure is 50% or more too high for an NA motor, I need to mount an NA FPR. My plan is to find some kind of connector that I can thread onto the stock fuel lines, and clamp a stock NA rubber fuel hose onto the other side. Which in turn would clamp to a stock NA FPR.
Anyone know what kind of connector I need? I really don't want to modify the fuel lines if I don't have to. Anyone make one? or whaet should I look for at the plumping supply shop/Home depot
Thanks!
My car is a 944S chassis that I'm installing an NA motor in. The stock fuel lines coming out from the fender have female threaded ends which connect to the stock male threaded 944S FPR on the fuel rail.
As the "S" fuel pressure is 50% or more too high for an NA motor, I need to mount an NA FPR. My plan is to find some kind of connector that I can thread onto the stock fuel lines, and clamp a stock NA rubber fuel hose onto the other side. Which in turn would clamp to a stock NA FPR.
Anyone know what kind of connector I need? I really don't want to modify the fuel lines if I don't have to. Anyone make one? or whaet should I look for at the plumping supply shop/Home depot
Thanks!
