silicondigital

I just took my fuel rail apart on my 951 and noticed that the line running to the Fuel Pressure Damper is larger then the one to the regulator. I just installed a Wet Nitrous system on my 944 N/A and tapped into the line going to the fuel pressure regulator, is this the right line or does the supply go to the damper??? If anyone knows for sure plese post ive got everything all apart on both cars right now and dont want to get the hoses switched arround! Thanks

txhedg

on the 951 the supply line runs to the damper. Not certain on the n/a, but assume its the same way

ringo951

Yea, on the 951 the supply line is the one closest to the front of the car. Should be same.

mmmbeer

The larger line is the feed and the smaller is return.

Eirik Kvello-Aune
<a href="http://www.diateam.no/porsche" target="_blank">www.diateam.no/porsche</a>

silicondigital

Thanks, i got it figured out this time...

JDeitz951

Crimped line goes to damper and that would be the pressure line. Clamped line goes to the FPR. 944 and 951.

Mark Parker

The larger line will always be the supply side.