ga993

Hey guys, xpost from the 993 board. I am selling my OEM Cup II wheels. Part number 993.362.128.00/Rear/ET55/9jx17 front is 993.362.124.00/ET55/7jx17. I have a guy w/ a 944 that wants to buy them, but is unsure if they will fit. You guys are the experts. He is worried about "lug nuts". Any thoughts?

Marcquito

They'll fit fine.

RED87944S

lug nuts on 944s are big,they will thread but around they are bigger

JimV8

Big nuts, funny. i believe the 993s work with the later 944 offsets.

RED87944S

for example when i got my wheels,the regular nuts would not fit in the whole,i ordered the right ones from same company..i think that might be the case

Van

Not stock ones... 993 and 944 lugnuts are the same Porsche P/N.

MichelleJD

The 944 must be MY1987 or newer. MY1986 and older has a much lower offset (23mm).

Rock

Theyll fit all 944's with stock bolt patterns, even the early offsets. The only problem with the early offset cars (MY86 and older) is that they will sit in about an inch. A spacer can cure this problem.

WHAMspeed

21mm front and 28mm rear, fills them out quite nicely

ga993

thanks guys for all the responses.