FS - Early offset brake rotors (PICS ADDED) (MIC ADDED)
#1
Nordschleife Master
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I'm selling all 4 (be 2 fronts and 2 rears) rotors from my 85.5 944. They are all in great shape. No cracks, grooves or warping. I pulled them off to go with the drilled variety. I don't believe they have ever been machined (No lip on the inner edges).
Asking $100 OBO + shipping. I really don't know what these are worth, I just want them gone.
The fronts measure at 20mm and the rears are 19.1mm. I don't have a brake rotor mic. All I have is a regular one, so I can't get into the small grooves, so I bet you could deduct a few hundredths of a mm from each one, but they are very smooth
Thanks,
Attachment 357129
I tried to show there there is almost no grooving. You can feel it with your fingers, but there is nothing that would ruin some new pads, or that couldn't be easily machined out
Attachment 357130
Attachment 357131
This is some minor surface rust on the back of one of the front rotors. It was on the bottom of the stack, and must have gotten a little wet from the concrete. One press of the brake pedal, and it would be gone.
Attachment 357132
Asking $100 OBO + shipping. I really don't know what these are worth, I just want them gone.
The fronts measure at 20mm and the rears are 19.1mm. I don't have a brake rotor mic. All I have is a regular one, so I can't get into the small grooves, so I bet you could deduct a few hundredths of a mm from each one, but they are very smooth
Thanks,
Attachment 357129
I tried to show there there is almost no grooving. You can feel it with your fingers, but there is nothing that would ruin some new pads, or that couldn't be easily machined out
Attachment 357130
Attachment 357131
This is some minor surface rust on the back of one of the front rotors. It was on the bottom of the stack, and must have gotten a little wet from the concrete. One press of the brake pedal, and it would be gone.
Attachment 357132
Last edited by m73m95; 08-07-2009 at 04:29 AM.