Rear seat removal (are the lowers just glued in?)
#1
Drifting
Thread Starter
Rear seat removal (are the lowers just glued in?)
I am removing my seats today to have them recovered.
Front seats were a cinch - 6 hex bolts held in each.
The top rear was easy also - two 10mm bolts held it in place.
Now for the lower portion of the rear seats - are these seats just glued into place? That seems to be the case, but I don't want to just start tearing 'em out without making sure.
Front seats were a cinch - 6 hex bolts held in each.
The top rear was easy also - two 10mm bolts held it in place.
Now for the lower portion of the rear seats - are these seats just glued into place? That seems to be the case, but I don't want to just start tearing 'em out without making sure.
#2
Nordschleife Master
There are also some clips on the top of the seat, but other than that you are just going to pull it out. Give it a controled yank and that should do it....