Electromotive TEC-II stand-alone??
#2
Rennlist Member
Join Date: May 2001
Location: Crofton, MD
Posts: 1,363
Likes: 0
Received 0 Likes
on
0 Posts
![Post](https://rennlist.com/forums/images/icons/icon1.gif)
Check out <a href="http://www.speedforceracing.com" target="_blank">http://www.speedforceracing.com</a> . The owner, turbo tim, has lots of experience with installing them and sells complete bolt in packages to make them more or less plug and play. He will even hook you up with basic software to tune with and offers over the phone and in person tuning assistance. A few people have tec II 951's and once they are dialed in they are insane machines. Another person on here has an SDS system which is comparitively much cheaper (I think it was around $1200 or so with some custom fabrication by him) but not as advanced. Good luck.
#3
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Join Date: Nov 2001
Location: Amherst, NH
Posts: 761
Likes: 0
Received 0 Likes
on
0 Posts
![Post](https://rennlist.com/forums/images/icons/icon1.gif)
There are plenty of TEC-II powered 951's out there...
Electromotive just recently released the TEC-III also - so take a look there.
If you're looking at TEC-2's look at SFR, Scott Gomes, and such.
If you want a TEC-III, then look at 944enhancement.com.
HTH!
Electromotive just recently released the TEC-III also - so take a look there.
If you're looking at TEC-2's look at SFR, Scott Gomes, and such.
If you want a TEC-III, then look at 944enhancement.com.
HTH!