Guys,

Am trying to get rid of a few things that I do not need anymore. Am willing to deal, therefore suggested prices are OBO. All prices include shipping in NA via postal service.

PM me if you have any interest. Thanks.

• SOLD Pair Amber Turn Signal Lens (OEM) - $15 (one has a repaired crack and I do not have the gaskets) NEW PRICE
• SOLD Exhaust Hangar - $4 (just trying to cover postage)
• SOLD Complete Hatch Wiper Assembly - $60 (good condition mechanically, very good cosmetically)
• SOLD Pioneer DEH -2900MP Head Unit -$45 (everything you need to install it, used for one year, excellent condition and great radio)
• SOLD Pioneer TS-A4670R 3-way 120W 4x6 speakers - $25 (they will fit in the doors with a slight bit of "engineering")

 

What do you mean by that,where is the problem,what do you have to do to make them fit?

 

There are few replacement speakers that will fit in the front door due to the depth of the magnet. When you put the plastic cover back on there is a gap between the cover and the door panel. These speakers are close probably 1/8" to 3/16" (3-4mm) too deep. I removed them from my 944, where the PO had actually used bent the door steel back to get these to fit flush and have the speaker cover fit properly. When I installed them, I slipped a 3/16" speaker spacer behind the door panel to eliminate the gap.

 

does the head unit have an auxiliary input?

 

El Commandante - of you are talking USB or Ipod, I do not think so. It is sold now too, sorry.

 

i was talking abouy the little round port in the front that is the same size as a headphone jack. but thats cool.

 

where did you find the spacer? or made one? I have a set of Eclipse 4x6s and their fit was very similar to what you are describing - they are less then 1/8 of an inch too thick, so the cover doesn't go on nicely w/o being bent

 

El Commandate - IIRC no, it does not have one.

Roman, I had bought a set of Infinity 4"x6" speakers for the rear. They came with a plastic surround (I guess that is what I would call it ) for use in certain mounting applications. It just happens to be the right size and shape to do the job. However, you could do the same thing with a sheet of 3/16" UHMW that you cut to fit properly

 

No takers for the lens' - will take any reasonable offer over $15.

Everything else is provisionally sold and PMs sent to all posters to the thread.

Apologies if you were not the first to contact me. I was surprised by the rapid demand for my odd & ends...

Many thanks everyone and to Rennlist for continuing to support my habit

 

All gone! Thanks Guys! Rennlist rocks!