944 Performance Parts For Sale
10-25-2008, 02:46 PM
#1
Pro
Thread Starter
Join Date: Sep 2001
Location: Oklahoma City OK
Posts: 743
Likes: 0
Received 0 Likes
on
0 Posts
944 Performance Parts For Sale
Scroll down to see the Recaro Seats and Momo Steering Wheel
None of the prices include shipping and they are negotiable. I accept paypal cashiers checks and money orders
1. Ported and polished head with like new valves. Has approximately 15000 mile of use on it. It came off of an early 85 944 street car
The good:
The head was decked so the compression on the motor was raised by about 0.05. The valves are like new as well as the seals and valve springs.
The bad:
When the motor through a rod it nicked an intake valve which will need to be replaced. After check the valve no replacement is needed so you can just bolt it on and go
I paid $700 for the head work. I will part with it for $200
2. Bored out throttle body in good condition. I paid $200 for the machine work, I will sell it for $100. If you look at the pics you can see the difference between the bored out TB and the stock unit.
3. Webcam camshaft. It has a grind on it that netted about 5 extra hp and torque in the midrange on my car. The cam has 15000 miles on it since being worked on. I will sell it for $150
4. Adjustable fuel pressure regulator set up to work on an early car. At the time they did not make ones for our car when I bought this unit. It includes all of the braided stainless lines pictured and the mounting bracket. It was meant to be used on a 928. Since it has an extra line it would make it easy to run a wet nitrous system on the car which was my plan but I never got around to it. See the pics. I will sell it for $100
5. Alternator from an early car with approximately 30k on it. I will sell it for $40
None of the prices include shipping and they are negotiable. I accept paypal cashiers checks and money orders
1. Ported and polished head with like new valves. Has approximately 15000 mile of use on it. It came off of an early 85 944 street car
The good:
The head was decked so the compression on the motor was raised by about 0.05. The valves are like new as well as the seals and valve springs.
The bad:
When the motor through a rod it nicked an intake valve which will need to be replaced. After check the valve no replacement is needed so you can just bolt it on and go
I paid $700 for the head work. I will part with it for $200
2. Bored out throttle body in good condition. I paid $200 for the machine work, I will sell it for $100. If you look at the pics you can see the difference between the bored out TB and the stock unit.
3. Webcam camshaft. It has a grind on it that netted about 5 extra hp and torque in the midrange on my car. The cam has 15000 miles on it since being worked on. I will sell it for $150
4. Adjustable fuel pressure regulator set up to work on an early car. At the time they did not make ones for our car when I bought this unit. It includes all of the braided stainless lines pictured and the mounting bracket. It was meant to be used on a 928. Since it has an extra line it would make it easy to run a wet nitrous system on the car which was my plan but I never got around to it. See the pics. I will sell it for $100
5. Alternator from an early car with approximately 30k on it. I will sell it for $40
Last edited by early85944; 12-02-2008 at 04:03 PM.
10-25-2008, 08:41 PM
#3
Burning Brakes
I *may* be interested in the head.
I had a timing belt failure recently, we're going to pull the head off Tuesday to assess the damage. Mine's a late model (86), and I'm not sure what the extent of the damage is, but if I need it, and it'll work, I'll most likely want it.
If someone else wants it right away, and they're sure, they can go ahead, otherwise I'll get back to you when I know.
I had a timing belt failure recently, we're going to pull the head off Tuesday to assess the damage. Mine's a late model (86), and I'm not sure what the extent of the damage is, but if I need it, and it'll work, I'll most likely want it.
If someone else wants it right away, and they're sure, they can go ahead, otherwise I'll get back to you when I know.
Trending Topics
10-27-2008, 06:54 PM
#8
Pro
Thread Starter
Join Date: Sep 2001
Location: Oklahoma City OK
Posts: 743
Likes: 0
Received 0 Likes
on
0 Posts
10-28-2008, 01:12 PM
#9
Pro
Thread Starter
Join Date: Sep 2001
Location: Oklahoma City OK
Posts: 743
Likes: 0
Received 0 Likes
on
0 Posts
The throttle plate inside the throttle body is 3.5mm larger in diameter than stock.
Here is a pic of the questionable valve as you can see it was only lightly touched. It is on the top side of the valve in the picture
Here is a pic of the questionable valve as you can see it was only lightly touched. It is on the top side of the valve in the picture
11-10-2008, 09:27 PM
#11
Pro
Thread Starter
Join Date: Sep 2001
Location: Oklahoma City OK
Posts: 743
Likes: 0
Received 0 Likes
on
0 Posts
I checked the valve on the head and it is good so no valve replacement is necessarry. I also have a pair of Recaro SRD in black for sale for $700 they do have some wear and I will post pics tommorow. I also have a MOMO steering wheel with hub adapter for a 944 for $200. All of these prices are negotiable
11-14-2008, 02:29 PM
#12
Pro
Thread Starter
Join Date: Sep 2001
Location: Oklahoma City OK
Posts: 743
Likes: 0
Received 0 Likes
on
0 Posts
Seats and Steering Wheel Pics
I am going to put the stuff on ebay soon but I will honor all rennlist buyers first. Please note the pics of the wear on the seats. One is in the seat without the sub hole leg bolster, the othe is in the back of the seat with the sub hole
11-14-2008, 04:30 PM
#13
Burning Brakes
Join Date: Nov 2008
Location: Delaware
Posts: 813
Likes: 0
Received 0 Likes
on
0 Posts
I'll take the steering wheel and hub adapter if you can wait until Tuesday. E-mail me at bbourdon@udel.edu.