Cargo cover help!!
05-12-2002, 03:59 PM
#1
Drifting
Thread Starter
Join Date: Apr 2002
Location: Atlanta
Posts: 2,179
Likes: 0
Received 0 Likes
on
0 Posts
Cargo cover help!!
Hi just wondering if any of yall knew if there was an easy fix to make the cargo cover in 944's roll up. My cargo cover has lost its spring tension and its not rolling back up. . .?? <img src="confused.gif" border="0">
05-13-2002, 02:52 AM
#3
Rennlist Member
I've never had to do it yet, but I remember a post on this awhile ago. Remedy was to remove one? end, then turn the inner rod to pretension the spring again, much like you would do to a home window shade.
05-13-2002, 11:25 AM
#4
Addict
Rennlist Member
Rennlist Member
I've never seen one of these up close, but can it be any more than a glorified roll up window shade? Hideously over priced and overengineered, of course, yet I wonder... could some answers, and perhaps parts be had from an old (larger diameter) roll up window shade?
Just a thought... Good Luck!!!
Jim <img src="graemlins/burnout.gif" border="0" alt="[burnout]" />
Just a thought... Good Luck!!!
Jim <img src="graemlins/burnout.gif" border="0" alt="[burnout]" />
05-13-2002, 12:19 PM
#5
Racer
Join Date: Jun 2001
Location: Santa Cruz, CA
Posts: 429
Likes: 0
Received 0 Likes
on
0 Posts
I was planning on taking off one end of the cover, as suggested earlier in this thread, and re-tensioning the spring, then re-riveting the cover back on.
Too many projects, and only two days per weekend... <img src="graemlins/crying.gif" border="0" alt="[crying]" />
Too many projects, and only two days per weekend... <img src="graemlins/crying.gif" border="0" alt="[crying]" />
