FS - 86 and 87 turbo parts with pics - new pics 6/15
#46
I'm thinking bronze a-la Techno Duck, with something special or contrasting with the centre caps... Haven't decided exactly what yet, need to photoshop some possibilities.
#47
Rennlist Member
I just did an installation on my car of this same setup - here is the thread with pictures.
https://rennlist.com/forums/944-turbo-and-turbo-s-forum/429911-rx7-oil-cooler-installation-with-pics.html
Part of what took me so long was assembling the hoses and figuring out how to mount the cooler. I put this kit together with the correct length hoses and the fittings so that I had a spare hanging around. I would be willing to sell it for $250 - There is probably about $200 in parts there between the cooler, areoquip re-usable fittings and the various adapters required.
https://rennlist.com/forums/944-turbo-and-turbo-s-forum/429911-rx7-oil-cooler-installation-with-pics.html
Part of what took me so long was assembling the hoses and figuring out how to mount the cooler. I put this kit together with the correct length hoses and the fittings so that I had a spare hanging around. I would be willing to sell it for $250 - There is probably about $200 in parts there between the cooler, areoquip re-usable fittings and the various adapters required.
#51
Addict
Rennlist Member
Rennlist Member
Thread Starter
Hey Mike - Just put it on ebay last night.
Hey - sounds good When you get a chance PM me your email addy and I'll send over a couple of close-up pictures and we can get shipping worked out.
You need late or early offset?
#55
Rennlist Member
cool...I might be interested in that. Did you have to fabricate anything up to fit the 951 oil cooler or duct air to it? If you could email me any pictures you might have, I'd really appreciate it
Also, OT, but how's your engine rebuild coming? I think I remember reading that you were building a high compression engine with some headwork and other modifications, and I'm curious to hear how its going.
Thanks
Also, OT, but how's your engine rebuild coming? I think I remember reading that you were building a high compression engine with some headwork and other modifications, and I'm curious to hear how its going.
Thanks
#56
Addict
Rennlist Member
Rennlist Member
Thread Starter
Here is another pic of the cooler close-up. It is shown hooked up to the 951 block off plate.
Here is a pic of the turbo water pumps I've got. $35 for the mount, $85 for the far left and center pump each and $15 for the right pump as it doesn't work.
Here is a pic of the turbo water pumps I've got. $35 for the mount, $85 for the far left and center pump each and $15 for the right pump as it doesn't work.
#60
Addict
Rennlist Member
Rennlist Member
Thread Starter