Steel control arm bushing
04-12-2008, 10:41 AM
#1
Rennlist Member
Thread Starter
Steel control arm bushing
I have new steel arms and new bushings. Here's the front bushing.
Notice the ridge in the one end and the dimples on the other.
Which goes toward the front of the car?
Notice the ridge in the one end and the dimples on the other.
Which goes toward the front of the car?
04-12-2008, 09:02 PM
#4
Rennlist Member
Thread Starter
I just checked my car in the garage and it looks like the dimples are in the front. Thanks Joe. Just want to make sure before I press that thing in there. It doesn't look they come out that easy once they are in.
05-31-2008, 02:51 PM
#5
Under the Radar
Rennlist Member
Rennlist Member
Join Date: May 2005
Posts: 5,869
Likes: 0
Received 0 Likes
on
0 Posts
Having the same exact problem right now. I have Meyle bushings, nothing from China. I set the dimples in front like the old arm, but the steel core sunk back (not like my old arms, where the core was up front). Can I correct for this?
I have no problem paying for new bushings, but this annoys me.
I have no problem paying for new bushings, but this annoys me.
