aben8057

Hey Mates,

I am in the middle of replacing the clutch on an 86 951. It has been exciting so far, with a few stubborn bolts holding there own. I have been able to remove them with a bit of patience and PB Blaster.
I am at the point where the transaxle needs to be removed. This process requires a transmission jack for disassemble but more important for reassembly. Unfortunately, I do not own one. I found a transmission jack adapter for a 3-ton jack however; do not see a need for it after this project.
I wanted to know if anyone in the CNJ area had such a tool. If so, I wanted to know if I could borrow it for a few weeks.
Alex

75ohm

Have a harbor freight nearby? I got mine there for 49.99!!!

aben8057

Yes, but rather than buy one then let it sit in the corner for years, I wanted to see if I could borrow one first.

PorscheDude1

I used a floor jack.

Lemming

I have the same one. Before that I used a floor jack, not as safe as a tranny, jack but with two people it's fairly easy.

Mike951

Give me a call at 908 489 7865.. you know where I live.. I shoudlnt be needing mine for the next few weeks

-Keith