Coolant high point vent location?
#1
Pro
Thread Starter
Join Date: Sep 2005
Location: Lake Tapps, WA
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Where the hell is it on my 944S? The clarks isnt very specific, and thisis my first time ever and i dont have any help! please give me some tips for doing this. There is still coolant in the block, and the front of the car is on jacks, what do i do?
also, what do i torque the crank pulley nut to (the one that has the timing, balance, and accesory pulleys on it)? thanks!
also, what do i torque the crank pulley nut to (the one that has the timing, balance, and accesory pulleys on it)? thanks!
#4
Advanced
Join Date: May 2006
Location: Tuscaloosa, AL
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Look in front of the intake runner for #1 cylinder.
The bleed screw faces right, toward the passenger side
of the car. It is on a metal fitting that is attached to the
head that leads to the metal pipe going to the radiator.
Darren
'87 944S
The bleed screw faces right, toward the passenger side
of the car. It is on a metal fitting that is attached to the
head that leads to the metal pipe going to the radiator.
Darren
'87 944S