ABS Reset switch - need a little wiring help
09-06-2007, 09:18 PM
#1
Pro
Thread Starter
ABS Reset switch - need a little wiring help
Hi Guys,
I want to put an ABS Reset switch in my 89 944 na race car. I searched the forums for this topic and the common path is to interrupt the ABS relay's power which will reset the ABS ECU. So I know what I want to do. What I don't have is a wiring diagram for my car.
I pulled the fuse box and there are 4 leads going to the ABS relay (G20) on my car. There's a nice big fat red wire, which typically is the hot lead, but its way too big a gauge to just power the relay. My guess is its the feed to the ABS system. But I could be wrong.
Can anybody tell me which wire is the power to the relay?
I want to put an ABS Reset switch in my 89 944 na race car. I searched the forums for this topic and the common path is to interrupt the ABS relay's power which will reset the ABS ECU. So I know what I want to do. What I don't have is a wiring diagram for my car.
I pulled the fuse box and there are 4 leads going to the ABS relay (G20) on my car. There's a nice big fat red wire, which typically is the hot lead, but its way too big a gauge to just power the relay. My guess is its the feed to the ABS system. But I could be wrong.
Can anybody tell me which wire is the power to the relay?
