Help with engine re-assembly - Never Mind - Figured it out
#1
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
OK, so I took the head off to replace some broken valve springs, clean it out really well, and lap the valves.
In order to get the head off to work on it, I took off a bunch of stuff like the exhaust manifold and the intake manifold, and all it's connections.
I'm having a little bit of trouble remembering all the connections to the intake manifold, specifically the larger diameter hoses.
Could someone help me out with a picture or a diagram?
Thanks in advance!
Erik.
In order to get the head off to work on it, I took off a bunch of stuff like the exhaust manifold and the intake manifold, and all it's connections.
I'm having a little bit of trouble remembering all the connections to the intake manifold, specifically the larger diameter hoses.
Could someone help me out with a picture or a diagram?
Thanks in advance!
Erik.
Last edited by eohrnberger; 08-08-2007 at 12:45 PM.
#2
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Just like the Internet age. Once yo post, you get an injection of inspiration and you figure it out. So Never mind. (Yeez, talk about a lame thread!)