went to tighten ac and alt belt one day noticed a puddle of brake fluid on the floor of the garage. the clutch pedal was at the floor. i replaced both the clutch master cylinder and the slave cylinder then when i tried to bleed the system air came out of the slave cylinder but never got any pressure to the pedal... still on the floor any suggestions would be helpful.

 

You replaced the clutch master and slave cylinders? Maybe the line is bad, it was on my car.

 

didnt see any spots that was leeking fluids

 

sounds like it's not bled yet and that you still have air in the line.

 

thats what i thought i had some one pumping the pedal and was bleeding it for about 5 min air kept coming out

 

You got air.