968 Installed Valve height - need spec. for machine shop !
06-08-2007, 10:34 AM
#1
Rennlist Member
Thread Starter
Join Date: Nov 2003
Location: Ottawa, Ontario, Canada
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
968 Installed Valve height - need spec. for machine shop !
Can anyone tell me the "installed valve height" for the 968 cylinderhead?
My head is at the machine shop and I got a call from them this morning - they want to verify that they are not out of spec.
They do have a copy of the factory Engine manual, however they claim that this spec. is not there. (and I don't have a copy at work).
Any help much appreciated.
Colin
My head is at the machine shop and I got a call from them this morning - they want to verify that they are not out of spec.
They do have a copy of the factory Engine manual, however they claim that this spec. is not there. (and I don't have a copy at work).
Any help much appreciated.
Colin
06-08-2007, 06:55 PM
#2
RL Community Team
Rennlist Member
Rennlist Member
I have a 968 cylinder head on the living room table, but it just got a valve job. I don't know how/where to measure.
Try posting on www.968forums.com, or at least in the 968 forum here on rennlist.
Try posting on www.968forums.com, or at least in the 968 forum here on rennlist.
