Gasket Retainer Users please chime in X-post
#1
Geaux Tigers!
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
About to install the Oil Pan with My Swiss's Oil Pan Gasket Retainers. If you installed them did you go get new bolts to compensate for the difference in the retainers depth?
BTW, don't know what happened to the original thread where My Swiss introduced his Oil Pan Gasket Retainers. Searched and found several links but the links are dead. Anyone save that thread?
BTW, don't know what happened to the original thread where My Swiss introduced his Oil Pan Gasket Retainers. Searched and found several links but the links are dead. Anyone save that thread?
#3
#5
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Don't use sealant except maybe in corners.
That's my .02. The sealant made my gasket bulge all over the place. maybe with retainers you can use it, but i say it's not worht it. I used no retainers and no gasket maker (i had to take it back apart and take off all the gasket maker) and it is fine.
That's my .02. The sealant made my gasket bulge all over the place. maybe with retainers you can use it, but i say it's not worht it. I used no retainers and no gasket maker (i had to take it back apart and take off all the gasket maker) and it is fine.
Trending Topics
#8
Geaux Tigers!
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by RM512
When I ordered the kit, new bolts came with it.
Last edited by ELLSSUU; 10-01-2006 at 05:39 PM.
#11
Geaux Tigers!
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by RM512
Nah, sorry. If I had to guess, I'd say 7-9mm longer than stock, or the thickness of the retainer.
Yeah, I figured at the worst I'd take the retainer with me tomorrow to a hardware store during lunch. Just being lazy.
![hiha](https://rennlist.com/forums/graemlins/roflmao.gif)
#12
Race Car
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Interesting suggestion about studs. I wish I had thought of those when I was flipping the rings with the engine in the car. Would have saved me a big headache. Good idea!