bleucamaro

I'm trying to troubleshoot some wiring in my car, and am getting what seems to be a funny voltage. Can an S2 owner measure the voltage accross their intake temp sensor. This sensor is part of the AFM and all you have to do is disconnect the AFM harness connector, turn the ignition to ON, and put a volt-meter accross pin 1 and pin 4 of the harness connector.

Thanks in advance.

Jfrahm

I get 4.95 volts DC

Sysgen

I can go check it out also if you want a second opinion

bleucamaro

I was getting the same, no need for a second opinion. Thought I might have a short, but I guess its wired that way.