MM951

A few of mine have turned into brittle red chunks of crap. The ones that didnt (at the rear of the muffler) have the studs broken off on the underbody, so the exhaust isnt supported correctly. I'd prefer to get this fixed asap and would love to pay $3 for a set of exhaust hangers at napa rather then $10 + each + shipping + waiting for the porsche ones..

thanks
mike

nickg

the metal part that i would suggest is one you will be familiar with Bosal # 251-697 (center hanger on a conquest) or 251-695 (colt hanger) eith one will work with the porsche rubber mounting. either will work with the ring mount hanger from the conquest bosal part 255-659
I suggest you go down to BC's in Kingston and have a look thru the bosal book, at the end of each brand there is a mounting/hardware section with drawings to see what will work...nissan, benz, saab (9000 hanger is looking very good) and Volvos look similar...BC's is a big stocking Jobber of ours, Ask for Tony or Eric (red) tell him you are a friend of mine. (nick from Bosal)

MM951

Very cool, I had a bunch of conquest crap laying around (those included) and I never made the connection...shouldn't have thrown em out with my 2 conquests..

appriecate it nick!