Cam will not turn **FIXED**
#31
Captain Obvious
Super User
Super User
Joined: Aug 2003
Posts: 22,846
Likes: 340
From: Cambridge, Ontario, Canada
Ok that's good planning.
Timing the cams is not that difficult. It’s more time consuming that anything else. If you can't find any info on this board do a search on the 928 board, there was a post on this very subject. The specification values might be different for the 944 but the procedure would be identical as the 32V, 928 PASSANGER side cam timing setup.
Timing the cams is not that difficult. It’s more time consuming that anything else. If you can't find any info on this board do a search on the 928 board, there was a post on this very subject. The specification values might be different for the 944 but the procedure would be identical as the 32V, 928 PASSANGER side cam timing setup.