Iceshark light kit reproduction
#1
Instructor
Thread Starter
Join Date: Oct 2003
Location: Los Angeles, CA
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Iceshark light kit reproduction
I'm not sure how many people have already started this project, but I'm thinking I'm going to jump on the boat too. However, I have a couple questions for those who currently have the set. Here's a few humble requests/questions I have:
1. Did the kit that Dan produced plug into the stock male plug that originally connected to the lights?
2. Does anyone have the kit lying around and able to take pictures of any connections (from wire to relay or plug), inline relays, and loop connections (to the alternator or ground bolts)?
Ideally, I'd like to see what methods he used to make all the various key connections and the rest of the kit is wiring (although the fiberglass insulation seems to be difficult to find - especially in black). Anyways, any help would be greatly appreciated. Thanks!
1. Did the kit that Dan produced plug into the stock male plug that originally connected to the lights?
2. Does anyone have the kit lying around and able to take pictures of any connections (from wire to relay or plug), inline relays, and loop connections (to the alternator or ground bolts)?
Ideally, I'd like to see what methods he used to make all the various key connections and the rest of the kit is wiring (although the fiberglass insulation seems to be difficult to find - especially in black). Anyways, any help would be greatly appreciated. Thanks!
#2
Three Wheelin'
Join Date: Apr 2004
Location: Indianapolis, IN
Posts: 1,752
Likes: 0
Received 0 Likes
on
0 Posts
https://rennlist.com/forums/924-931-944-951-968-forum/238772-iceshark-light-kit-schematic.html
I think there is a link to pics there... if not PM me and I'll send you the linke that I have in my PMs
I think there is a link to pics there... if not PM me and I'll send you the linke that I have in my PMs
#3
Burning Brakes
Join Date: Nov 2003
Location: The Colony, TX
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
Dan's kit plugged into the stock harness on the driver's side headlight plug. I am days away from producing the battery cables and then I will start to make the first lighting harness for my NA car. There are several aspects of Dan's kit that are top quality in how he manufactured the kit. Like using sealing shrink tube so the harness is water tight.