I've got a brand new set of rotors for an 86' 951, all 4 (2) front, (2) rear.
These new at Paragon are $350.58 for the set, I'll take $275+shipping.

Welt front springs, I'm not sure of the rate, they are blue if that helps. They are either 200 or 250 lbs. Will fit all 944's, 944 turbo non-s.
New at Paragon $233.96 for a pair, I'll take SOLD

Shipping is from 98901.
Thanks,
Jason

 

Jason,
If the springs are 250# I'll take them. Is there a part number I can confirm this with?

 

If they are blue...I don't think that they are 250lb. My 250's are black.

-J

 

I guess i am second in line for the springs. let me know what shipping would be to 55359

thanks

 

I'm not 100% of them being Welt's
The ID is 3.5", the length is 13".
They are blue and have a marking of "HD-1" on them
I'm pretty sure they are meant for use with the stock struts.

 

re: springs - there should be a part # stamped or etched on there somewhere - should be either SP200 or SP250.

 

I'll look at them again tonight, and post what I find.
I did find this thread, which sheds a little light.
https://rennlist.com/forums/showthre...t=HD-1+springs

 

No number anywhere other than the "HD-1" in white lettering.

 

still interested in your springs. pm me if steve doesnt take them.

thanks

 

i bought some hr springs recently that were red with hd-2 on them they were supposedly 250 lbs.

 

As far as I know the welt springs are Eibachs. I've seen 200s and 250s both in black. Maybe they came from a Bilstein package or something??

 

I pulled out so go to the head of the line!

 

Where does the line for the springs form, and what # are we up too??

Keep me posted, if ya would.

 

The blue HD-1's are 200#, the red HD-2's are 250#.

 

I will take a number on the springs also Jason. Let me know. I really could use them.
Todd