OPRV align tool
09-17-2005 | 03:54 PM
#1
Thread Starter
Racer
Joined: Sep 2005
Posts: 348
Likes: 0
From: Atlanta- E Side
OPRV align tool
I have the 921 tool from Paragon, but Im not sure if it's long enough to
do the job.
I have the 3 piece OPRV. It's really long compared to the tool.
Will the 921 tool work in the early 944 with the 3 piece design?
do the job.
I have the 3 piece OPRV. It's really long compared to the tool.
Will the 921 tool work in the early 944 with the 3 piece design?
09-17-2005 | 05:06 PM
#2
Thread Starter
Racer
Joined: Sep 2005
Posts: 348
Likes: 0
From: Atlanta- E Side
Never mind. I just checked the dept of the OPRV port and it's rather shallow.
The spring on the 3 piece must really get compressed when fully seating the
nut.
Tool is working!
Now if I can just fine some da@# green coolant with NO PHOSFATz!
The spring on the 3 piece must really get compressed when fully seating the
nut.
Tool is working!
Now if I can just fine some da@# green coolant with NO PHOSFATz!