924S Fuel line repair
08-10-2005 | 07:04 PM
#16
Thread Starter
Intermediate
Joined: Jun 2005
Posts: 36
Likes: 0
Ok, so this is starting to make sense to me.....
Once you cut off the swedged fitting and pull off the hose, there will be a smaller diameter metal line which i feed the rubber line on to, and then clamp.
correct?
Once you cut off the swedged fitting and pull off the hose, there will be a smaller diameter metal line which i feed the rubber line on to, and then clamp.
correct?
08-10-2005 | 07:24 PM
#17
Race Director
Joined: Aug 2002
Posts: 17,643
Likes: 8
From: Phoenix, Az
Originally Posted by ike229
Ok, so this is starting to make sense to me.....
Once you cut off the swedged fitting and pull off the hose, there will be a smaller diameter metal line which i feed the rubber line on to, and then clamp.
correct?
Once you cut off the swedged fitting and pull off the hose, there will be a smaller diameter metal line which i feed the rubber line on to, and then clamp.
correct?
