Remanufactured Engine Wiring Harness for 944/951
#106
That looks like the turbo timer temp sender plug??......... but its been a long time since I Have had the stock plug on that one. Someone with a stock 86 should be able to identify it.
#107
Addict
Rennlist Member
Rennlist Member
Yes, looks like the thermo switch for the turbocharger water pump.
#109
Originally Posted by theedge
How about a female crimp on butt connector with heatshrink over it? If its sized right, it might work the same way...
I am sure half the people who will by one........don't even use the stock connector anymore.
#111
Developer
Thread Starter
Yes - the new harness will have all the proper ohms and values. More so than even your current harness probably does as it corrodes - it gains resistance.
We thought we had found the attached connector - but the 944/951 parts catalog is wrong - can any one of you owners tell me where this one is used?
We thought we had found the attached connector - but the 944/951 parts catalog is wrong - can any one of you owners tell me where this one is used?
#112
Nordschleife Master
Carl,
Looks like the connector for the O2 or the connector for the turbo water pump. Actually i think these are used multiple times.
Someone correct me if i'm wrong.
Looks like the connector for the O2 or the connector for the turbo water pump. Actually i think these are used multiple times.
Someone correct me if i'm wrong.
#116
Developer
Thread Starter
Because of all the requests we have received for "special wiring" so that you can run your piggy-back electronics thru the wire loom, we have decided to use a recloseable wire loom in the main body of the engine wiring harness. It will raise the price about $30 per wire harness, but you will be able to open the harness, lay in your wiring , and reseal it.
This is a braided mesh Heavy-Duty Polyester industrial wire sleeve, with a velcro closure all the way along the back of the loom. Not cheap slit-conduit like you see at Autozone.
From the manufacturer: "Tough, durable braided construction provides flexibility, prevents condensation, and permits heat and moisture dissipation. Sleeving expands to several times its diameter. Made of polyester (PET) for good resistance to abrasion and chemicals. Temperature range is -103° to +257° F. UL recognized and CSA certified. Easy-Open Wrap-Around— No need to disconnect wires or cables to install, just wrap the sleeving around them and secure with hook-and-loop closure. Access is permitted at any spot along the length of sleeving. Color is black. "
This is a braided mesh Heavy-Duty Polyester industrial wire sleeve, with a velcro closure all the way along the back of the loom. Not cheap slit-conduit like you see at Autozone.
From the manufacturer: "Tough, durable braided construction provides flexibility, prevents condensation, and permits heat and moisture dissipation. Sleeving expands to several times its diameter. Made of polyester (PET) for good resistance to abrasion and chemicals. Temperature range is -103° to +257° F. UL recognized and CSA certified. Easy-Open Wrap-Around— No need to disconnect wires or cables to install, just wrap the sleeving around them and secure with hook-and-loop closure. Access is permitted at any spot along the length of sleeving. Color is black. "
#118
Nordschleife Master
Originally Posted by Carl Fausett
Because of all the requests we have received for "special wiring" so that you can run your piggy-back electronics thru the wire loom, we have decided to use a recloseable wire loom in the main body of the engine wiring harness. It will raise the price about $30 per wire harness, but you will be able to open the harness, lay in your wiring , and reseal it.
This is a braided mesh Heavy-Duty Polyester industrial wire sleeve, with a velcro closure all the way along the back of the loom. Not cheap slit-conduit like you see at Autozone.
From the manufacturer: "Tough, durable braided construction provides flexibility, prevents condensation, and permits heat and moisture dissipation. Sleeving expands to several times its diameter. Made of polyester (PET) for good resistance to abrasion and chemicals. Temperature range is -103° to +257° F. UL recognized and CSA certified. Easy-Open Wrap-Around— No need to disconnect wires or cables to install, just wrap the sleeving around them and secure with hook-and-loop closure. Access is permitted at any spot along the length of sleeving. Color is black. "
This is a braided mesh Heavy-Duty Polyester industrial wire sleeve, with a velcro closure all the way along the back of the loom. Not cheap slit-conduit like you see at Autozone.
From the manufacturer: "Tough, durable braided construction provides flexibility, prevents condensation, and permits heat and moisture dissipation. Sleeving expands to several times its diameter. Made of polyester (PET) for good resistance to abrasion and chemicals. Temperature range is -103° to +257° F. UL recognized and CSA certified. Easy-Open Wrap-Around— No need to disconnect wires or cables to install, just wrap the sleeving around them and secure with hook-and-loop closure. Access is permitted at any spot along the length of sleeving. Color is black. "
Thanks
#119
Developer
Thread Starter
Progress?
We have everything we need to start building them except: 1) the 20-pin connector we need; 2) and the 2 connectors I have shown photos of above.
The single straight-pin female connector is no problem, its the 3-pin O2 sensor that has us stumped for the moment. I am working with my Porsche rep on that.
Wasn;t somebody going to send us a 87 951 engine wiring harness to work with?
We have everything we need to start building them except: 1) the 20-pin connector we need; 2) and the 2 connectors I have shown photos of above.
The single straight-pin female connector is no problem, its the 3-pin O2 sensor that has us stumped for the moment. I am working with my Porsche rep on that.
Wasn;t somebody going to send us a 87 951 engine wiring harness to work with?