Zero10

Okie dokie, I already wrote you asking about cutting, whoops

Premier

Invicashield and stongard's designs were created with the beginner in mind. There are more seams and pieces so that almost anyone could install the film with satisfactory results. This is where pricing is differentiated - degree of difficulty. If the design is one entire piece, then expect isntallation to cost more.......especially for companies with software that wraps around edges and entire bumpers.

Maciek

Premier,
Would you please also PM me with a price for the venturi film? Also, do you have shops you can recommend to do the expert install (we are on different coasts). Lastly, what can I expect to be charged for a flawless install of venturi film on my S2 (same body style as the 951). Thanks,

mtb968

Premoer,

Ditto for me. Can you send me a quote and detail of what would be covered on my 01C4cab. Also, I would be interested in a professional installer in the Raleigh/Durham/Chapel hill area which has done many Pcars. Any other comparison information between yourproduct and the 3M? Do you know of seal gray Pcars local to my area for me to look at before making a decision?

thanks,
Mike

Premier

Pricing for the installation will depend which kit is used. We have two different designs -

Standard Full Kit - the film cuts off right around the bend on the bumper
Premier Full Kit - Film wraps around the entire bumper

Our pricing starts around $650 for the Standard Full Kit and $825 for the Premier Kit.

There are installers in the industry that are very good at what they do, however, we do not personally know of any in your areas.

We also do complete wraps on high-end exotics......anything that can be wrapped, we can clear bra it. For those interested, please feel free to email us at sales@premiermobilegroup.com

For those interested in our services and would like to set up a group buy for your local area, please email us for details and scheduling. Thanks!

Premier

Sorry, but didn't answer your questions...here ya go:

Any other comparison information between your product and the 3M? Do you know of seal gray Pcars local to my area for me to look at before making a decision?
-Venture is 3m's major competitor. In Nissan's testing, 3m's film was punctured w/ a 9lb probe while Venture's film did not break until 20lbs of pressure was applied.
-Venture contains an anti-corrosion polymer which inhibits rust and mold growth...only Venture has this
-After ageing both Ventureshield and 3m in a lab, 3m's film yellowed and cracked after a simulatd 3 yrs of UV exposure while Venture's film showed no sign of yellowing or cracking after 7 yrs of exposure.
-Film does not use clearcoat to in order to obtain gloss.......clearcoat scratches fairly easy.

We are not saying that 3m is a poor grade product. As a matter of fact, we still use 3m for some dealerships. Overall, we prefer to use Venture for the above reasons.