slowazzporsche

I'm not sure what my colleague wants for the transmissions.. the body parts are my area, the mechanical are his but i'll ask him

User 41221

Yeah, definitely send me a pic or two, I am interested. I have access to a very good welder, so I can deal with it being cut to be shipped.

Regards,

Strike-Force

Better than factory? No. I just don't want to have to pup out dings, etc. Also check the greyhound shipping prices, Thanks. PM me when you have pics plz. =]

zehnd

Any early car belly pans available?

slowazzporsche

would you prefer me to torch it or grind it out? I'm good with both so take your pick!

I'll take a look, I might have one, but it'll need some cleaning

I was just ribbin yeah, I'll make sure the rear 1/4 I find is absolutely dent and rust free, what about slight chips in the paint?

Steve Payne

I am interested in the front nose panel for a 86 turbo, gear shift **** and boot, and the plastic cover in front of the windshield under the hood that covers the wiper motor and heater blower...Any of this parts available?

slowazzporsche

These are all N/A cars as stated at the very top. All gear ***** are gone, along with everything else you asked for

Strike-Force

I'm going to be repainting anyway so chips don't matter. Just as long as it's not rusting there.

slowazzporsche

sorry about the delay with pics, we got hit with 10" of snow over 48 hrs and freezing rain, going anywhere is treacherous

Strike-Force

I understand, just shoot me a PM when you get them =]

zehnd

Just great.

I'm driving up there on Saturday for the weekend. It's just as bad here in North Battleford as well. It's going to be a long winter.

If you do have that belly pan I wouldn't mind hooking up with you to get it. Let me know.
Thanks

slowazzporsche

NEW PIC HOST, PICS WORK NOW!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

pics of the ice racer uploaded now! The only things not available off of it are the boxed rockers, fibreglass front fenders, the turbo rear valance and the front fibreglass turbo spoiler.

Everything else you see is; the flawless windshield
windshield wipers
The roll cage
all the electronic gadgets and gizmo's
the master cylinder, the brake lines
the springs
the shocks
those beautiful steelies
the sunroof panel
rear bumper w/assembly
rear tail lights
both rear 1/4 panels and a few other things you see incl. the hood

just shoot me a price and chances are i'll accept. I just want this thing all parted out so I can crush the rest of it and move onto the next car I'm stripping!

pics can be seen here 944 ice racer

The next car after this is an 85.1 (early 944 not the later) with black dash, black interior, black full leather seats, low miles engine.. etc. so let's get these porsches stripped! I won't sell anything off of that one til most of this one is gone

User 41221

Good gawd, how much was that cage when it was originally installed?? My only concern is how much is that going to cost to ship to me in KC, or if its disassembled so that it can be shipped, will it be able to be pieced back together? lol

Lets talk, I am interested. If you are cuttingthe car apart, I would rather have the cage cut out where its attached, rather than ground out.

Regards,

slowazzporsche

well I could ball-park the figure. Considering a basic 4-point goes for 500USD, let's figure $100 usd/point and then var. material, sizes, and complexity of cage. I wouldn't doubt this would've cost the previous owner $1200+ USD if he would've "farmed" it out to someone else to do the work. Of course I'm not expecting that, since the car is being crushed when it's all stripped I can torch off the areas it's spot welded to, then grind those pieces off. I would disassemble it at the joints with a torch or grinder (whichever you prefer). You'd almost be doing me a favor taking this thing haha. I can ballpark a weight and see what it'd be like to ship it, you'll definately get it cheaper from me rather then having something like this built. If I can get rid of this cage, the gauges and electronics, the brake system and the rear 1/4's/bumper/tail lights, I'll start on the next car right after that. I'll get back to you by Monday with a cost to ship it and just throw a price at me.

slowazzporsche

BUMP

I have 2 n/a front fenders, one has a dent and rust around the atenna (driver's side) and the passenger side is immaculate.

I have two rear 1/4 panels in immaculate shape

2 rear bumpers, 1 front bumper,

1 n/a front lip fron an '84

1 antenna, air conditiong compressor, condenser, reservoir.. all from an '84

a beige back seat (no scribe) and the bottom to it from an '84

12/13 point roll cage - that's a serious cage from an ice racer

several electronic gizmos and such


make me offers I want these gone from my garage