968 Mirrors Help!!
#32
I cannot seem to be able to fully compress the mirror springs with the 14mm hex tool - way way too stiff... and having problems also using the bolt and nuts gizmo... I'm using metric parts, hence M12 which fits well down the centrehole of the spring assembly, but don't really have the space to fit the nut inside the mirror, once I have fit the spacer and the washer... :s
#34
Rennlist Member
Join Date: Oct 2005
Location: Up High in the Colorado Rockies
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
#35
I used a 14mm hex key at the end of a T-shaped handle. Because currently I don't have access to a bench vice, I pushed the mirror assembly against the chest whilst compressing the spring. Not recommended. But it got the job done.