dgz924s

I have a Spin-Tech race muffler on my car and have a spare that I would like to have someone close by install it on their 944NA. I would like a second opinion how they feel about it for comparison on mine. I know of no other NA that has this muffler and need another to see what differences there may be etc. And how he/she feels about the experience with it.

You will need to find a Final muffler and cut it off and weld the Spin Tech to it and a tip as well but not needed cause it has a stinger already but a tip could be welded on if concerned about the look.


ps and YES it is LOUD

User 41221

Sure, we can do that. We just put a 3" stainless cat back on the '83 yellow car, after having a straight pipe on it. I would like to compare it, and have a Road Dyno unit that I can use to compare before and after for power gains/losses.

We are in KC, so we arent far away from you.

Drop me a pm or email me at sh944@rennlist.com.

Regards,

dgz924s

We have a winner! Thanks Scott! I am 2 hours north and coming down for the KCR CR I can bring it then. Pipe on the inlet is 2.5 FYI

StupEd05

KCR CR??? Is that the KCRPCA's club race coming up around Halloween?

dgz924s

Yes

StupEd05

Sweet, I live about 20 minutes from Heartland Park. So you can bet I will be there!

Let me know the results if you get these mufflers road dyno'd. I have heard that a high flow (or even no) muffler can really give you a lot of "in the seat of your pants" feel. If this is true, I need to buy one!

dgz924s

If any of you have been to any DE's there last year or in April 04 you may have heard it. I have headers on so the stock manifold will produce some differences.

Scott have headers?