Sunroof Switch
#1
Rennlist Member
Thread Starter
Join Date: Jul 2003
Location: 951 -> 958 (SOCAL)
Posts: 3,726
Likes: 0
Received 0 Likes
on
0 Posts
Sunroof Switch
While I was installing the boost gauge a while back, I managed to knock the pins out of the holder for the sunroof switch in the center counsole. All I have are 6 colored wires, and somem numbers on the plastic holder, what colored wire goes to what number on the plastic holder that goes into the back of the switch.
#2
Hey Man
Rennlist Member
Rennlist Member
I'm not sure about the German color translation but here goes:
1=blue/green
2=blue/black
3=green/red
4=green/green? (2wires)
5=green/black (2wires)
6=black
If it smokes you don't know me!
1=blue/green
2=blue/black
3=green/red
4=green/green? (2wires)
5=green/black (2wires)
6=black
If it smokes you don't know me!
#3
Drifting
2Tight - A Question...
I was troubleshooting my power mirrors today, and accidentally broke the Siemens/Telefuinken 12-pin connector powering the front windows. The plastic harness was brittle, and the small female banana pins just popped out. Now, I cannot figure what the color coding sequence is. Help!
Zach
Zach