Zackb911

I failed emissions the other day with Really Hi CO and a little over on HC. I fixed my TPS and idle which were way off and the car leaned out alot but before my Re-Test Id like to add a little something something to the gas to gaurantee I pass. So...
My Options:

I have 2 bottles of Berryman B-12 Chemtool (Toluene,Methanol,Acetone,Mixed Xylenes,Etc) Directions one bottle to 16-20 gallons

32oz 91% Isopropyl Alcohol (rubbing Alcohol & 9% water)

Which should I use and in what proportion? I know alot of people have used to Isopropyl and I got the highest alcohol % I could find... They didnt have any of the "Emissions in a can" type stuff.

Thanks!
Zack

Predator

Man, I wouldn't drink any of that ****!

Scott at Team Harco

True. If want gas to pass - try beans!

Zackb911

Predator & Scott thanks so much for your help...
Anyway I put in 1 1/2 bottles of dry gas that I think is 100% Isopropyl alcohol and have an appointment this afternoon we'll see if it passes

Scott at Team Harco

Don't mention it. That's what we're here for.

Good luck.

aeronautica86

use the alcohol, but make sure you fill the tank up, add the alcohol, and run a lot (1/2 - 3/4 tank) of it through the engine before you test