Stock 944 N/A Rear Wheel HP
#1
Instructor
Thread Starter
Join Date: Mar 2002
Location: Inland Empire, CA
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
Stock 944 N/A Rear Wheel HP
I am thinking of putting my car on the dyno, just to know what my car's performance is. However, I would like to know if anybody already went through this exercise for their car and has a ball-park number I should expect. Or may you guys know what are the typical numbers for rear wheel horse power and torque for a stock 87 944 n/a.
Thanks.
Thanks.
#2
Race Director
125 rwhp at 5800 rpm with about 125 lb-ft of torque.
Be happy if you hit 130 rwhp. If you get more than 135 ask the dyno guy to check his stuff since he will be wrong.
If you are below 120 rwhp you may have work to do.
BTW... My spec car came in at 131 rwhp and 135 lbs-ft of torque right after a freshening. Stock minus a cat.
Be happy if you hit 130 rwhp. If you get more than 135 ask the dyno guy to check his stuff since he will be wrong.
If you are below 120 rwhp you may have work to do.
BTW... My spec car came in at 131 rwhp and 135 lbs-ft of torque right after a freshening. Stock minus a cat.
#3
Official Bay Area Patriot
Fuse 24 Assassin
Rennlist Member
Fuse 24 Assassin
Rennlist Member
i got 129 on my 84 with the only mod being a K&N.... dynos after I had put a header and a Flowmaster with running about 3% richer got me to about 133 rwhp. Not much you can do to these cars...
Andy
Andy