this weeks 'FREE TO RENNLIST MEMBER' part...
#32
Race Car
Thread Starter
Join Date: Apr 2002
Location: FloriDUH
Posts: 3,817
Likes: 0
Received 0 Likes
on
0 Posts
Hey Devon - i don't think the compressor would work for you, its out of an early (83/84) 944, not early as in early offset 83-86. as far as i know its good, it looks as though it had been replaced not too long ago.
julie - all i have are bumper shocks. any other shocks here are spoken for. sorry! i still have to check on that carpet, i'll do that later today.
-Mike-
julie - all i have are bumper shocks. any other shocks here are spoken for. sorry! i still have to check on that carpet, i'll do that later today.
-Mike-
#34
Rennlist Member
hey erau, dont forget, i have early engine in my car. my ac compressor right now i believe is the late one and only like one of its mounts match up and i'm afraid that the one bolt holding it is going to snap and drop it on the road!
is that whats different? or is there something else that wont work, such as the controls inside the car and everything
is that whats different? or is there something else that wont work, such as the controls inside the car and everything
#35
Race Car
Thread Starter
Join Date: Apr 2002
Location: FloriDUH
Posts: 3,817
Likes: 0
Received 0 Likes
on
0 Posts
Race Bred - none of the bumpers are cracked. $15 and shipping takes whatever one you want.
Devon - the fittings on the compresors are different. early or late, the mounting doesn't matter, but the fittings for the hoses do. the controls are also different, but i dont think that would stop a swap as long as the hoses were used correctly.
-Mike-
Devon - the fittings on the compresors are different. early or late, the mounting doesn't matter, but the fittings for the hoses do. the controls are also different, but i dont think that would stop a swap as long as the hoses were used correctly.
-Mike-
#38
Race Car
Thread Starter
Join Date: Apr 2002
Location: FloriDUH
Posts: 3,817
Likes: 0
Received 0 Likes
on
0 Posts
Race Bred - i have a front valance, but it will need some repair work. i was going to use it on my track car, but if you want it you can have it for $40. i have a buddy in orlando so i might be able to meet you there, it all depends on whats going on.
thanks!
-Mike-
thanks!
-Mike-
#39
Race Car
Thread Starter
Join Date: Apr 2002
Location: FloriDUH
Posts: 3,817
Likes: 0
Received 0 Likes
on
0 Posts
okay everyone - nobody wanted those freebies; it looks like they'll FINALLY hit the garbage on wednesday ( i wanted them out today, but rennlist wasn't working for me yesterday so i couldn't post). if anyone wants one of the 3 parts i mentioned for the cost of shipping, or any of the other stuff for cheap, just let me know - otherwise it'll most likely be gone shortly... i'm seeing 2 p-cars in the garage soon
thanks everyone!
-Mike-
thanks everyone!
-Mike-
#40
Race Car
Thread Starter
Join Date: Apr 2002
Location: FloriDUH
Posts: 3,817
Likes: 0
Received 0 Likes
on
0 Posts
well i finally cleaned out the garage enough to get the race project in there.
now i need a couple of speed/reference sensors to see if that fixes the problem. if anyone has a decent pair they'd like to trade for something, let me know. i'll also take them if they work but the plastic connectors have come apart... i know they work like that but are unsightly - this doesn't matter on a track beast
-Mike- <><
now i need a couple of speed/reference sensors to see if that fixes the problem. if anyone has a decent pair they'd like to trade for something, let me know. i'll also take them if they work but the plastic connectors have come apart... i know they work like that but are unsightly - this doesn't matter on a track beast
-Mike- <><