Notices
924/931/944/951/968 Forum Porsche 924, 924S, 931, 944, 944S, 944S2, 951, and 968 discussion, how-to guides, and technical help. (1976-1995)
Sponsored by:
Sponsored by:

Sunroof Seal

Thread Tools
 
Search this Thread
 
Old 04-28-2004 | 11:44 PM
  #1  
Mike951's Avatar
Mike951
Thread Starter
Drifting
 
Joined: Aug 2002
Posts: 2,920
Likes: 0
Default Sunroof Seal

Does anyone have a sunroof seal for sale? The one that comes out with the roof.

Thanks
Mike
Old 04-29-2004 | 12:03 AM
  #2  
ribs's Avatar
ribs
Rennlist Member
 
Joined: May 2001
Posts: 1,363
Likes: 0
From: Crofton, MD
Default

I just picked one up new from paragon as my old one was quite leaky. It was very expensive ($120 I think) and looked identical to the chevy stuff they sell at pep boys for 1/10th the price, but I could be wrong. I'll mail you my old one if you want...you pay shipping.
Old 04-29-2004 | 12:05 AM
  #3  
Mike951's Avatar
Mike951
Thread Starter
Drifting
 
Joined: Aug 2002
Posts: 2,920
Likes: 0
Default

Thanks for the offer, but if I'm gonna do it I wanna go for a new one, don;t want any problems.

Mike
Old 04-29-2004 | 12:07 AM
  #4  
ELLSSUU's Avatar
ELLSSUU
Geaux Tigers!
Rennlist Member
 
Joined: Jun 2001
Posts: 9,037
Likes: 41
From: Louisiana
Default

Vertex--$19 for the one attached to the car and $69 for the one attached to the sunroof. Easy to install. You must help the roof retract the first few times and put the car in the sun to make the seal maliable enough for the roof to shut all the way. For the first month or more the roof may stick up in the back a little.

http://www.vertexauto.com/epcproduct...vertexauto.com
Old 04-29-2004 | 12:09 AM
  #5  
Mike951's Avatar
Mike951
Thread Starter
Drifting
 
Joined: Aug 2002
Posts: 2,920
Likes: 0
Default

Thanks, I'll check them out
Old 04-29-2004 | 12:11 AM
  #6  
ribs's Avatar
ribs
Rennlist Member
 
Joined: May 2001
Posts: 1,363
Likes: 0
From: Crofton, MD
Default

Scott...I'm not 100% sure I installed mine correctly. I might have done it backwards. Is the felted side of the seal supposed to be on the outside or inside? If I installed the smooth side on the outside, it looked like it was going to be too fat to fit. I knew I should have taken notes when I did this...damn. It wouldn't be a big deal to reverse it though...




All times are GMT -3. The time now is 11:53 PM.