Teekster

I’m looking at a set of BBS major wheels but I’m not sure they will fit my car. It’s a 91 s2 can. The wheel specs are as follows:

front 8x16, et 10.2 hub 71.6 5x130
rear 9x16, et -2 hub 71.6, 5x130

thoughts?

Zirconocene

I think those ET -2 are going to be a problem, unless you go with spacers. PET is showing offsets of 52.3, 55, 60, or 65, depending on width. Having written that, the 10.2s might also be an issue.

Hopefully someone more knowledgeable can hop on here and give better guidance. This stuff confuses me a good deal.

Good luck.

FrenchToast

They won't fit, sorry. They would stick out about 1.5" further from stock, and likely rub on the fenders.

Teekster

Bummer. It would have been a good look.

FrenchToast

BBS made mesh wheels in correct offset for the later cars. Can be found on 928s, sometimes 964s. Maybe they still make them, I don't know.

Kurt R

I don't think they make them anymore, at least not in 16".
I have a set of BBS RS 157 and 158 wheels, they're 16x7 and 16x8, 49 offset.
I bought the barrels and lips so I could make two of them 16x9, but with the lack of 245/45/16 street tires I haven't bothered to do anything with them.

Teekster

Willing to sell?