DIY Build your own sway bars
#1
DIY Build your own sway bars
this thread is more for me to toss ideas around, and keep track of what i find.
At the moment im trying to decide between straight bar with splined ends or a bent(or welded ends) bar.
SO the plan is to use 1.25" (32mm) front bar, and 22mm(7/8") rear bar
At the moment im trying to decide between straight bar with splined ends or a bent(or welded ends) bar.
SO the plan is to use 1.25" (32mm) front bar, and 22mm(7/8") rear bar
Last edited by Not_Sure; 03-07-2020 at 01:38 AM.
#2
possible front bar mount, Looking for the cheapest billet mount, the bent steel could be easily had for cheap
Possible candidate for front: http://www.ddmworks.com/SolsticeSky-...ts_p_860.html#
http://www.jamesbaroneracing.com/sho...roducts_id=773
rear: https://www.ecstuning.com/b-ecs-part...cs~dk/?pdk=AgI
Possible candidate for front: http://www.ddmworks.com/SolsticeSky-...ts_p_860.html#
http://www.jamesbaroneracing.com/sho...roducts_id=773
rear: https://www.ecstuning.com/b-ecs-part...cs~dk/?pdk=AgI