I have a 1984 NA, and I need to replace the seel where the shift linkage enters the trans-axle. I wasn't too worried about it, but after looking under the car today and seeing a drip of clear fresh transfluid (I changed the fluid not long ago) I figured it's leaking enough to warrant some worry. Does any one have any advice on how to change this seal / where to get one? I've removed the shift linkage before to rebuild it with thrust bearings, so I have some idea of what's going on down there, but any advice on hidden surprise issues I might have would be great! Thanks!

 

You can pry the seal out with a small screwdriver or pick, inserted between the shaft and seal lip. Available from Porsche. 019.301.457

 

Awesome, thanks so much!