C4S wheels test fitment (pics)
#1
C4S wheels test fitment (pics)
Well although these wheels are sold to another rennlist I did some test fitting on keiths car today (thats my old black car for those keeping track)....
But many thanks to keith for this one, and we think we figured out what sort of spacers you are going to need when you get these paul, 1/4 of an inch out back is just about all you'll need, then the normal 21mm in front.....
Also you might need to grind down a bolt in the fenderwell, but they will fit with those massive tires...
And on to the pics...
But many thanks to keith for this one, and we think we figured out what sort of spacers you are going to need when you get these paul, 1/4 of an inch out back is just about all you'll need, then the normal 21mm in front.....
Also you might need to grind down a bolt in the fenderwell, but they will fit with those massive tires...
And on to the pics...
#5
Those look great. Not a fan of the 993 twists on 944's, but those work well.
How did the car drive with those on? Turning and/or full throttle acceleration ok too? Did you have to tie back the parking brake cables?
Is that a 295/30 or 285/30 on the rear?
How did the car drive with those on? Turning and/or full throttle acceleration ok too? Did you have to tie back the parking brake cables?
Is that a 295/30 or 285/30 on the rear?
#6
Specs on the wheels,
18x8 et 50 up front 225/35/18's
18x11 et 45 out back 295/30/18's
We didn't do a test drive because we only had the 21 mm spacers to try them with, and with those they were too far outside the fenders, but with out the spacers they didn't clear the inside of the fender.
18x8 et 50 up front 225/35/18's
18x11 et 45 out back 295/30/18's
We didn't do a test drive because we only had the 21 mm spacers to try them with, and with those they were too far outside the fenders, but with out the spacers they didn't clear the inside of the fender.
Trending Topics
#10
The fronts clear just fine, they are only 8 inches wide, there is room for another full inch under there with out problems and the right offset.....
Its the rear that has the fitment issues they just need a little bit of spacing, but it shouldn't be a problem at all, perhaps even the factory spacers used on the early 944's?
Its the rear that has the fitment issues they just need a little bit of spacing, but it shouldn't be a problem at all, perhaps even the factory spacers used on the early 944's?