Songzzz

Parts listed for 86'951.

Used:
Tail Lens
Mirrors Assembly
Injectors
Sway Bars
Spacers 21 & 28 mm (930.331.611.04 and 477.501.701) pair
Door handles
K26/6
I/C Pipes
Brake MC

15 miles and 1 week old:
Upgraded Castor Mounts (951 341 023 01) + Eccentrics (951-341-431-02) + Nuts (900-910-115-02)

New:
Voltage Regulator
Front Engine Reseal Kit
Rollers and Bearings Kit for balance shaft and timing belt

Going cheap. PM if interested.

Cyrus951

Hello,

Your PM box is full, so I'll just type here:

hello,

you mentioned you have door handles for sale..

are you selling the lock cylinders?

if so, i'm going to need one

Thanks buddy.

josephsc

I take it this is all located in Singapore or Taiwan?

handscreate

Well, if it's not in Singapore, I would be very interested in the rollers and bearings kit for the balance shaft and timing belts. Also, the re-seal kit for the front. Also, now that I think about it, if the sway bars and spacers are in good condition, I could be very interested in those too. However, if all these parts are in Taiwan/Singapore, and I am going to have to pay high shipping charges to get them, I will pass. Let me know.

Cass944

Ill take the caster blocks and the spacers if they're still available.

Thanks

Cass944

is there a rear sway bar also? did turbos have rear bars i dont even know. i know my NA doesnt have a rear. woudl that be an upgrade for me? if so im also interested in that.

Mike B

Your PM box is still full so I'll get in line here.

I'm interested in the front end seal kit if it's still available.

tazman

If anybody is interested I have a set of sway bars from my 88 TurboS. They are 26.8mm front and 18mm rear. tazz.mann@verizon.net

Cyrus951

Sounds like Cass is interested..

Cass944

hah i was just about to say that. Im gonna PM you.

Songzzz

Guys, tks for the response.

Although in Taiwan, I am able to ship them to you fast and cheap.

Will posting the price in a while.

Tks!

Songzzz

Here it goes... Price + shipping cost to US.

Used:
Tail Lens pair = $30 + $15(S)
Mirror Assembly pair = $50 + $15(S)
Injectors x 4 = $50 + $10(S)
Sway Bars = $50(F) or $40(R) or $80(both) + $25(S)
Spacers pair (930.331.611.04 & 477.501.701) = $60 (21mm) + $70 (28mm) + $15(S)
Door handles = $40 + $10(S)
K26/6 = $100 + $25(S)
I/C Pipes = $25 + $15(S)
Brake MC = $25 + $10(S)
TPS = $25 + $10(S)
Idle Stab = $50 + $10(S)

**15 miles and 1 week old:
Upgraded Castor Mounts (951 341 023 01) + Eccentrics (951-341-431-02) + Nuts (900-910-115-02) = $110 + $10(S)

**Hyd Lifters: 2 New ($35 each) + 4 x Good used ones ($20 each) + $10(S)

Brand New:
Head Gasket (Normal) = $25 + $10
Head Gasket (Wide Fire) = $35 + $10
Voltage Regulator $40 + $10(S)
Front Engine Reseal Kit $80 + $10(S)
Rollers/Tension/Bearings Complete Kit (use when replacing belts) $90 + $10(S)

led

do you have any pics of the tail lenses? I might be interested

Cass944

ack nevermind. i thought when you said cheap you meant really cheap.

Songzzz

Sorry for the misled. In my opinion, cheap.. cause the parts listed are in very good condition. Anyway, I will look at the prices again. Meanwhile, why not PM me your offer?